Novozymes - Ultraflo XL - Beta-glucanase
Novozymes Ultraflo® XL - In this product the key enzyme activity is provided by endo-beta-glucanase that hydrolyzes (1,3)- or (1,4)-linkages in beta-D-glucans xylanase that hydrolyzes (1,4)-beta-D-xylosidic linkages in xylans.
Component name: Beta-glucanase (endo-1,3(4)-) Xylanase
Activity: 500 BGU/g 1500 FXU/g
Side activities: The product contains activity of Alpha-amylase
Color: Light brown
Physical form: Liquid
Approximate density (g/ml): 1.21
Color can vary from batch to batch. Color intensity is not an indication of enzyme activity.
Efficient wort separation and beer filtration
To ensure an efficient brew house process and longer beer filtration cycle, viscosity-increasing components and water-binding cell walls must be minimized. The enzymes in malt are not heat-stable and do not possess the capabilities to ensure consistent process conditions.
With Novozymes Ultraflo®, the viscosity of wort and beer can be further reduced. The results increase brew house efficiency and extract yields, achieve a faster filtration and minimize process fluctuations.
● Consistent and high speed of wort filtration
● Consistently high utilization of beer filtration equipment
● Consistently high brew house capacity
● Possibility to eliminate production variations due to varying quality of raw materials
● High flexibility in choice of mashing temperature profile
● Possibility of using High Gravity Brewing and Very High Gravity Brewing
● Secure minimal investment in brew house and beer filtration capacity
● Higher extract yield
Ultraflo® XL is a classic multi-active β-glucanase and xylanase preparation for improved wort separation and beer filtration.
Filtration enzymes are often added to all brews to level out fluctuations in brewing raw materials, secure consistently high brew house performance, and reach consistently high beer filtration rates. All Novozymes’ filtration enzymes break down the unmodified cell walls from barley malt and unmalted barley. The more intact the cell wall materials, the higher the dosage of enzymes required to attain acceptable brew house performance and beer filtration. The most advanced filtration enzymes, such as Ultraflo® Max, provide significantly better performance than even the best well-modified malt, especially for beer filtration.
Only Ultraflo® Max contains the GH-10 family xylanase, which very effectively breaks down arabinoxylans to non-viscous polysaccharides, resulting in a reduction in viscosity that cannot be matched by standard filtration enzymes. This can be seen in figure 1 below.
The use of Ultraflo® Max as a filtration enzyme makes it possible to combine High Gravity Brewing and Very High Gravity Brewing with efficient mash filtration, as demonstrated in figure 2.
At lower gravity, the difference in mash separation performance between the two enzymes is less pronounced, but for beer filtration, Ultraflo® Max is always superior. This can be seen in figure 3.
The low wort and beer viscosity results in a significantly slower differential pressure increase across the filter over time, producing more filtered beer per filter run and minimizing beer loss. Compared with no enzyme use, beer filtration cycles can be reduced by up to 50%. Compared with filtration enzymes including the family GH-10 xylanase, beer filtration is improved by up to 25–30%. Ultraflo® effectively breaks down cell walls, which allows for higher extract yields in the order of 0.5 to 2.0%, depending on the quality of raw materials.
Standard filtration enzyme vs. Ultraflo® Max
Ultraflo® Max was evaluated against a standard β-glucanase in a trial series of 30 brews. The trials were carried out in a brewery using 12 MT moderately modified malt per brew. Dosages were 1.8 kg of Ultraflo® Max versus 2.5 kg of standard β-glucanase per brew. The average trial data is summarized in the table below.
Significant improvements in brew house performance and beer filtration were observed when using Ultraflo®. This is shown in table 1. Total beer volume per filtration cycle went from 3,800 hl to 4,900 hl, resulting in kieselguhr savings of 15%.
Usage and dosage
Ultraflo® products are added to the mash tun during mash-in, starting when around one-third of the grist has been loaded into the mash tun.
Ultraflo® products 0.100–0.25 kg/ton of grist, but depends deeply on malt quality, adjunct ration and type of raw material.
More dosage information can be found in the “Brewing Handbook”.
Optimum pH and temperature
The optimal working conditions for the Ultraflo® series is 45–70/75°C and a pH of 4.0–6.5.
The figures below show the influence of temperature and pH on Ultraflo® Max and Ultraflo® XL performance under brewing conditions.
Figures 4 and 5 show the influence of temperature and pH on Ultraflo® performance
Enzyme data for wort separation and beer filtration products
- Declared enzyme: β-glucanase (endo-1,3(4)-)
- Catalyzes the following reaction: Endo-β-glucanase that hydrolyzes (1,3)- or (1,4)-linkages in β-d-glucans
- Declared activity: 45 BGU/g
- E.C/ I.U.B. no.: 184.108.40.206
- Physical form: Liquid
- Production method: The enzyme product is manufactured via fermentation of microorganisms not present in the final product. The production organisms are not modified using modern biotechnology
- Density: 1.21 g/ml
More information about these products is available in the Novozymes Brewers Handbook.
Please see the Novozymes Ultraflo® XL - Product Data Sheet
Safety, handling and storage
Safety, handling and storage guidelines are provided with all products.